D38/100
Albany Tap Water Quality: Is It Safe to Drink? (2026 Report)
Serving 5,154 residents · Texas
What's In Albany's Tap Water?
1
Contaminants Tested
0
Exceed EPA Limits
1
Above EPA Goals
1 contaminant above EPA health goals
| Contaminant | Detected | Limit (MCL) | Status |
|---|---|---|---|
Lead (90th percentile) | 0.007 mg/L | 0.015 mg/L | Above Goal |
EPA Violation History
13
Violations (last 5yr)
7
Unresolved
9
Health-Related
TIER 3Unresolved
Monitoring Violation
This is a paperwork/process violation — it does not mean a contaminant was detected at unsafe levels.
TIER 2Unresolved
Exceeded the Maximum Contaminant Level (running average)
TIER 2Unresolved
Exceeded the Maximum Contaminant Level (running average)
When: April 1, 2025 – June 30, 2025Rule: Stage 2 DBPREnforcement: Informal — resolved cooperativelyVerify on EPA.gov
TIER 2Unresolved
Exceeded the Maximum Contaminant Level (running average)
When: January 1, 2025 – March 31, 2025Rule: Stage 2 DBPREnforcement: Informal — resolved cooperativelyVerify on EPA.gov
TIER 2Unresolved
Exceeded the Maximum Contaminant Level (running average)
When: October 1, 2024 – December 31, 2024Rule: Stage 2 DBPREnforcement: Informal — resolved cooperativelyVerify on EPA.gov
TIER 3Resolved
Surface water treatment technique failure
When: July 2, 2024 – September 23, 2024Enforcement: Resolving — corrective action underway
TIER 2Unresolved
Exceeded the Maximum Contaminant Level (running average)
When: July 1, 2024 – September 30, 2024Rule: Stage 2 DBPREnforcement: Informal — resolved cooperativelyVerify on EPA.gov
TIER 2Unresolved
Exceeded the Maximum Contaminant Level (running average)
When: April 1, 2024 – June 30, 2024Rule: Stage 2 DBPREnforcement: Informal — resolved cooperativelyVerify on EPA.gov
TIER 3Resolved
Disinfection byproduct treatment technique failure
When: September 13, 2023 – November 27, 2023Rule: Ground Water RuleEnforcement: Resolving — corrective action underway
TIER 3Resolved
Surface water treatment technique failure
When: July 1, 2023 – September 23, 2024Enforcement: Resolving — corrective action underway
TIER 2Resolved
Exceeded the Maximum Contaminant Level (running average)
When: April 1, 2023 – June 30, 2023Rule: Stage 2 DBPREnforcement: Resolving — corrective action underway
TIER 2Resolved
Exceeded the Maximum Contaminant Level (running average)
When: January 1, 2023 – March 31, 2023Rule: Stage 2 DBPREnforcement: Resolving — corrective action underway
TIER 2Resolved
Exceeded the Maximum Contaminant Level (running average)
When: October 1, 2022 – December 31, 2022Rule: Stage 2 DBPREnforcement: Resolving — corrective action underway
Understanding violation severity
Tier 1Urgent health risk. Utility must notify all customers within 24 hours.Tier 2Important health or treatment issue. Customers notified within 30 days.Tier 3Administrative or monitoring issue. Reported in the annual water quality report.
Source: EPA Safe Drinking Water Information System (SDWIS) · Updated quarterly
Water Utility Details
CITY OF ALBANY
Population Served
1,854
Water Source
Surface Water
System ID
TX2090001
FORT GRIFFIN SUD
Population Served
3,300
Water Source
Purchased Surface Water
System ID
TX2090005
Frequently Asked Questions About Albany Water
Is Albany tap water safe to drink?
Albany, Texas tap water receives a grade of D (38/100), which is considered poor. 0 contaminant(s) exceed EPA maximum contaminant levels and 79 violation(s) are on record. Residents should consider using an NSF-certified water filter to reduce contaminant exposure.
What contaminants are in Albany's water?
Of the 1 contaminants tested in Albany's water supply, the most notable include Lead (90th percentile). No contaminants exceed EPA legal limits. 1 contaminant(s) exceed EPA health goals (MCLGs), which are non-enforceable targets set at levels with no known health risk.
Does Albany have any water quality violations?
Yes, Albany has 79 EPA violation(s) on record, with the most recent in 2025. Violation types include MON, MCL, Other. 40 of these are health-based violations, which are the most serious category.
Do I need a water filter in Albany?
Albany water meets EPA standards, so a filter is not strictly necessary. However, some residents prefer the added security of a water filter. EPA health goals (MCLGs) are stricter than legal limits and are set at levels with zero expected health risk. 1 contaminant(s) exceed these stricter goals.
Where does Albany's tap water come from?
Albany's drinking water is sourced from surface water and supplied by CITY OF ALBANY and 1 other water system(s). The system serves approximately 5,154 people. Surface water sources include rivers, lakes, and reservoirs.
How often is Albany's water tested?
Under the Safe Drinking Water Act (SDWA), water utilities are required to regularly test for over 90 contaminants. Testing frequency varies by contaminant — some are tested monthly, others quarterly or annually. Albany's water systems must report results to the EPA and publish an annual Consumer Confidence Report (CCR). The data on this page reflects the latest available EPA testing data.
How does Albany's water compare to other cities in Texas?
Albany's water quality score of 38/100 earns a grade of D, which is considered poor. This is a concerning score that suggests significant water quality issues. Visit our Texas state page to see how all cities in the state compare.
What should I do if I'm concerned about Albany's water quality?
If you have concerns about Albany's tap water, consider these steps: (1) Request your utility's annual Consumer Confidence Report for detailed local data. (2) Get your water independently tested through a state-certified laboratory. (3) Consider an NSF-certified water filter rated for the contaminants found in your area. (4) Contact your water utility (CITY OF ALBANY) with specific questions. (5) Report water quality issues to your state drinking water program or the EPA Safe Drinking Water Hotline at 800-426-4791.